Xerox ColorQube 9301

February 2013
2-573
ColorQube® 9303 Family
OF 4b
Status Indicator RAPs
- 89-561-00 NVM entries for RALPH
media registration cali
-
bration got corrupted or
reset
Refer to OF 12 Service Code
RAP
- 91-632-00 Print head 1 has changed
since last boot
-
- 91-633-00 Print head 2 has changed
since last boot
-
- 91-634-00 Print head 3 has changed
since last boot
-
- 91-635-00 Print head 4 has changed
since last boot
-
- 91-636-00 The IOD automatic image
maintenance tool has
tried repeatedly to run
and has failed enough to
exceed the disabled limi
-
tation, or has been manu-
ally disabled via
diagnostics
If the problem persists, perform
the 91-636-00 RAP
- 91-637-00 IOD Y run out NVRAM
parameters are reset
If the problem persists, perform
the 91-637-00 RAP
- 91-638-00 IOD chronic jets are
detected
Perform the 91-638-00 RAP
- 91-639-00 Sent once per cold purge.
Sent when the overall
purge, which might
request multiple heads to
be purged, is requested.
A cold purge is performed
at power up. That is, the
ink in the system is cold,
it is warmed up, then a
purge is performed
No service action required
- 91-640-00 Sent once per warm
purge. Sent when the
overall purge, which
might request multiple
heads to be purge, is
requested. A warm purge
is performed during the
lifetime of a power on
session. The ink is
already up to temp, then
the print heads are
purged
No service action required
Table 1 Status messages - to F
UI Message
Status
Code Reason for Message Reference / Action
- 91-641-00 A freeze off means that
one or more, print heads
are allowed to cool down
so that the ink is in a solid
state. This would then be
followed by a cold purge.
The freeze off would be
communicated by the
freeze off DC status
updates, and the cold
purges that would follow
would be communicated
by the cold purge DC sta
-
tus updates
No service action required
- 91-642-00 Sent when a cold purge
for head 1 has completed
No service action required
- 91-643-00 Sent when a cold purge
for head 2 has completed
No service action required
- 91-644-00 Sent when a cold purge
for head 3 has completed
No service action required
- 91-645-00 Sent when a cold purge
for head 4 has completed
No service action required
- 91-646-00 Sent when a warm purge
for head 1 has completed
No service action required
- 91-647-00 Sent when a warm purge
for head 2 has completed
No service action required
- 91-648-00 Sent when a warm purge
for head 3 has completed
No service action required
- 91-649-00 Sent when a warm purge
for head 4 has completed
No service action required
- 91-650-00 Head 1 freeze off has
completed
No service action required
- 91-651-00 Head 2 freeze off has
completed
No service action required
- 91-652-00 Head 3 freeze off has
completed
No service action required
- 91-653-00 Head 4 freeze off has
completed
No service action required
- 91-840-00 IME in jet substitution and
single sided print mode.
Increments the AIF
counter by 1
No service action required.
Table 1 Status messages - to F
UI Message
Status
Code Reason for Message Reference / Action