Xerox WorkCentre 3550 - REP 8.1 Registration Roll Clutch

April 2010
4-25
Phaser 3635MFP/WorkCentre 3550
REP 8.1
Repairs and Adjustments
REP 8.1 Registration Roll Clutch
Parts List on PL 8.25
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to GP 10 General Disassembly Precautions.
1. Remove the left side cover, REP 28.1.
2. Remove the main motor, REP 4.1.
3. Remove the feed bracket, PL 8.25 Item 20.
4. Remove the registration roll clutch, PL 8.25 Item 21.
Replacement
1. Replacement is the reverse of the removal procedure.