April 2010
6-45
Phaser 3635MFP/WorkCentre 3550
dC330, dC606
General Procedures/Information
dC606 Internal Print Test Patterns (3635 Only)
Purpose
To print internal test patterns for image quality analysis.
Procedure
NOTE: Refer to IQ1 Image Quality Entry RAP for information on the test patterns.
1. Enter diagnostics, GP 1 Diagnostics Entry.
2. Enter Diagnostics Routines.
3. Enter Other Routines.
4. Enter 606 Print Test Patterns.
5. Select Image Quality Test Patterns 1 - 19.
6. Select the Features, 1 or 2 sided and the paper tray.
7. Touch the Start Test.
20-050 V.34 4800 bps Line1 Emits V.34 4800 bps on line 1. On/Off.
20-051 V.34 7200 bps Line1 Emits V.34 7200 bps on line 1. On/Off.
20-052 V.34 9600 bps Line1 Emits V.34 9600 bps on line 1. On/Off.
20-053 V.34 12000 bps Line1 Emits V.34 12000 bps on line 1. On/Off.
20-054 V.34 14400 bps Line1 Emits V.34 14400 bps on line 1. On/Off.
20-055 V.34 16800 bps Line1 Emits V.34 16800 bps on line 1. On/Off.
20-056 V.34 19200 bps Line1 Emits V.34 19200 bps on line 1. On/Off.
20-057 V.34 21600 bps Line1 Emits V.34 21600 bps on line 1. On/Off.
20-058 V.34 24000 bps Line1 Emits V.34 24000 bps on line 1. On/Off.
20-059 V.34 26400 bps Line1 Emits V.34 26400 bps on line 1. On/Off.
20-060 V.34 28800 bps Line1 Emits V.34 28800 bps on line 1. On/Off.
20-061 V.34 31200 bps Line1 Emits V.34 31200 bps on line 1. On/Off.
20-062 V.34 33600 bps Line1 Emits V.34 33600 bps on line 1. On/Off.
20-063 On Line Quiet State Lline connected, no signal on the line On/Off.
Table 14 Output codes 20
Code Displayed Name Description General
To Next Page
Loading...
