Yamaha WaveRunner - Drive Coupling Removal; Drive Shaft Removal; Bearing Removal

5-36
E
POWR
REDUCTION DRIVE GEAR
SERVICE POINTS
Drive coupling removal
1. Remove:
• Reduction drive gear housing
2. Remove:
• Drive coupling
1
NOTE:
While holding the drive shaft
2
with the rotor
holder
3
, loosen the drive coupling with the
coupler wrench
4
.
Coupler wrench:
YW-06551/90890-06551
Universal magneto and rotor
holder:
YU-01235
Rotor holder:
90890-01235
1
4
2
3
Drive shaft removal
1. Remove:
• Drive shaft
NOTE:
Press in the direction of the arrow.
Bearing removal
1. Remove:
• Circlip
• Rear bearing
• Collar
• Front bearing
NOTE:
Remove the front bearing, spacer, and rear
bearing using a press.
È For USA and Canada
É For worldwide
Driver handle—large:
YB-06071
Driver rod L3:
90890-06652
Bearing housing needle bearing
installer:
YB-06111
Needle bearing attachment:
90890-06653
È
É