8-21
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
Shift cable holder installation
1. Install:
• Shift cable holders
NOTE:
Install the shift cable holders so that mark
a
and mark
b
are in the positions shown in the
illustration.
Shift cable stopper installation
1. Install:
• Shift cable stopper
WARNING
Be sure to fit the projection
1
on the shift
cable stopper into the groove in the outer
cable.
Remote control cables adjustment
Refer to “CONTROL SYSTEM” in Chap-
ter 3.
To Next Page
Loading...
