Yamaha WaveRunner - Rubber Seal Installation

87
E
HULL
HOOD
SERVICE POINTS
Steering master components inspection
1. Inspect:
• Each component part
Damage/wear
→
Replace.
Rubber seal installation
1. Apply:
• Instant adhesive
(onto the mating surfaces of the rubber
seal
1
and steering master assembly
2
)
NOTE:
After assembling the steering master assem-
bly
2
, apply instant adhesive onto the mating
surfaces of the rubber seal
1
and steering
master assembly
2
in the area
a
shown in
the illustration.
FWD
a
1
2
STEERING MASTER