Yamaha WaveRunner - Flywheel Magneto Removal; Starter Clutch Inspection

5-46
E
POWR
GENERATOR AND STARTER MOTOR
SERVICE POINTS
Flywheel magneto removal
1. Remove:
• Flywheel magneto bolt
1
• Washer
NOTE:
While holding the flywheel magneto
2
with the
sheave holder
3
, loosen the flywheel magneto
bolt.
Sheave holder:
YS-01880-A/90890-01701
2. Remove:
• Flywheel magneto
1
• Woodruff key
NOTE:
While holding the flywheel magneto with
sheave holder
2
, remove the flywheel mag-
neto with the rotor puller
3
.
Rotor puller:
YM-01082/90890-01080
Starter clutch inspection
1. Check:
• Starter clutch rollers
1
Damage/wear
→
Replace.