99
E
HULL
HOOD
FRONT HOOD
Visor installation
1. Install:
• Visor
Installing steps:
• Install the bushings
1
onto the screws
2
as shown in the illustration.
• Install the visor and tighten the screws,
making sure to hold the nuts so that they
do not turn.
T
R
.
Screw:
1.1 N • m (0.11 kgf • m, 0.8 ft • lb)
21
Double-sided tape installation
1. Install:
• Double-sided tape
1
NOTE:
Before affixing the double-sided tape
1
, be
sure to clean the areas on the front hood
where the tape will be affixed to remove any
dirt.
1
1
To Next Page
Loading...
