Yamaha WaveRunner - QSTS Grip Inspection

8-10
E
HULL
HOOD
QSTS GRIP
SERVICE POINTS
QSTS cable inspection and adjustment
1. Inspect:
• QSTS cables
Frays/kinks/rough movement
→
Replace.
2. Adjust:
• QSTS cable length
a
NOTE:
• Before adjusting the QSTS cables, set the
trim grip to the neutral position.
• Adjust the QSTS cable lengths
a
to the
specified length and be sure to take up any
slack.
QSTS cable length:
72
±
0.5 mm (2.83
±
0.02 in)
QSTS grip inspection
1. Inspect:
• QSTS grip
Damage/wear
→
Replace.