Yamaha WaveRunner - QSTS Cable (Jet Pump End) Installation; QSTS Cable Stopper Installation; Shift Cable (Jet Pump End) Installation

8-20
E
HULL
HOOD
REMOTE CONTROL CABLES AND
SPEED SENSOR LEAD
QSTS cable (jet pump end) installation
1. Install:
• QSTS cable (jet pump end)
WARNING
The QSTS cable must be screwed in more
than 8 mm (0.31 in).
QSTS cable set length
a
(jet pump end):
13.6 mm (0.54 in)
QSTS cable stopper installation
1. Install:
• QSTS cable stopper
WARNING
Be sure to fit the projection
1
on the QSTS
cable stopper into the groove in the outer
cable.
Shift cable (jet pump end) installation
1. Install:
• Shift cable (jet pump end)
WARNING
The shift cable must be screwed in more
than 8 mm (0.31 in).
Shift cable set length
a
(jet pump end):
13.6 mm (0.54 in)