YASKAWA A1000 Series Technical Manual

B.3 Parameter Table
YASKAWA ELECTRIC SIEP C710616 27C YASKAWA AC Drive A1000 Technical Manual 453
Parameter List
B
■ U8: DriveWorksEZ Monitors
U6-22
(62H)
Zero Servo Pulse Movement
Displays how far the rotor has moved from its last position in PG pulses (multiplied by 4).
10 V: No. of pulses
per revolution
1–
U6-25
(6BH)
Feedback Control Output
Output monitor for the ASR speed loop.
10 V: Motor
secondary rated
current
0.01% –
U6-26
(6CH)
Feed Forward Control Output
Output monitor for Feed Forward control.
10 V: Motor
secondary rated
current
0.01% –
<18> Values shown here are for 200 V class drives. Double the value when using a 400 V class drive.
No. (Addr.) Name Description
Analog Output
Level
Unit Page
U8-01 to
U8-10
(1950H to
1959H)
DriveWorksEZ Custom
Monitor 1 to 10
DriveWorksEZ Custom Monitor 1 to 10
10 V: 100% 0.01% –
U8-11 to
U8-13
(195AH to
195CH)
DriveWorksEZ Version
Control Monitor 1 to 3
DriveWorksEZ Version Control Monitor 1 to 3
No signal output
available
––
No. (Addr.) Name Description
Analog Output
Level
Unit Page
OLV/PM AOLV/PM
CLV
V/f w/PG
CLV/PM
V/f OLV
common_
TMonly
OLV/PM AOLV/PM
CLV
V/f w/PG
CLV/PM
V/f OLV
common_
TMonly
OLV/PM AOLV/PM
CLV
V/f w/PG
CLV/PM
V/f OLV
common_
TMonly
All Modes
common_
TMonly
All Modes
common_
TMonly

YASKAWA A1000 Series Specifications

General

Series	A1000
Type	AC Drive
Altitude	Up to 1000m without derating
Output Frequency	0-400 Hz
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Communication Options	Modbus, DeviceNet, Profibus, Ethernet/IP
Ambient Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Humidity	5% to 95% (non-condensing)
Enclosure Rating	IP20
Horsepower	0.5 to 1000 HP
Power Range	0.4 - 630 kW (varies by voltage and model)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Cooling Method	Fan Cooled
Safety	Safe Torque Off (STO)