YASKAWA A1000 Series

4.3 The Drive and Programming Modes
YASKAWA ELECTRIC SIEP C710616 27C YASKAWA AC Drive A1000 Technical Manual 97
Start-Up Programming & Operation
4
■ Using Input Terminals S1 through S8 to Switch between LO/RE
The user can also switch between LOCAL and REMOTE modes using one of the digital input terminals S1 through S8
(set the corresponding parameter H1- to “1”).
When setting the multi-function input terminals,
Note: 1. Refer to Parameter Table on page 400 for a list of digital input selections.
2. Setting H1- to 1 disables the LO/RE key on the digital operator.