YASKAWA DX100 - 7.4.3 Clearing the System Monitoring Time Display

7 System Diagnosis
DX100 7.4 System Monitoring Time Display
7-17
7.4.3 Clearing the System Monitoring Time Display
The moving time and operating time can be cleared and set back to 0 by
following procedure. These operations can be performed in the SYS
MONITORING TIME window, or in the individual windows.
1. Select the time to be cleared.
– The confirmation dialog box appears.
2. Select “YES.”
– The cumulative time value at the cursor line is reset to 0, and a new
time measurement begins.