YASKAWA DX100 Service Manual

10 LED Indicator on Circuit Board
DX100 10.1 LED Indicator on YCP 01 Circuit Board
10-1
10 LED Indicator on Circuit Board
10.1 LED Indicator on YCP 01 Circuit Board
The LED indicators: LED1/LED2 on the YCP01 circuit board show the
statuses as in the following table. The LED indicators show the operating
statuses for the single YCP01 circuit board.
LED0 KED1 Status
OFF OFF The power is not turned ON.
ON OFF Searches the connecting device.
OFF BLINK Before the BIOS starts
Searches the booting device
ON BLINK Booting device ready
ON ON The BIOS initialization has been
completed./OS boot starts.
CN104
CN105
CN106
LED2LED1
LED2/LED1

YASKAWA DX100 Specifications

General

Programming Language	Inform III
Compatible Robots	Motoman robots
Operating Temperature	0-45°C
Humidity	20-80% RH (non-condensing)
Protection Class	IP20
Interface	Ethernet
Safety Standards	ANSI/RIA R15.06-1999
Pendant	Available
I/O Capacity	1024 inputs / 1024 outputs
Storage Temperature	-10-60°C