YASKAWA DX100 - 9.1.4 External Memory Equipment

9Error
DX100 9.1 Error Message List
9-11
9.1.4 External Memory Equipment
Error No. Data Error Message Contents
3010 - Floppy disk drive cable not connected
3020 - Floppy disk not inserted into floppy
disk drive
3021 - CompactFlash not inserted into
CompactFlash slot(PP)
3022 - USB media not inserted
3030 - Floppy disk protection is ON
3040 - File not saved on the media
3050 - File saved on the media
3060 - Out of memory on the media
3070 - Number of files on the media
3080 - I/O error on the media
3090 * Transmission error with the media
1 Framing error
2 Overrun error
3 Parity error
4 Data code error
5 Data read error
6 Data write error
7 Data time out
8 Serial I/O error
9 Error other than described above
3100 - Total checksum error
3110 - Syntax error
3120 * HEX code error
1 Specification error of data decode
2 Specification error of EOF record
3 Record type error
4 Total check error of record
3130 - Verify error
3140 - Wrong pseudo instruction
3150 * Concurrent I/O record error