YASKAWA DX100 - 6.1.2 Calibrating Operation; 6.1.2.1 Registering All Axes at One Time

6 Operations After Replacing Parts
DX100 6.1 Home Position Calibration
6-4
6.1.2 Calibrating Operation
6.1.2.1 Registering All Axes at One Time
1. Select {ROBOT} under the main menu.
2. Select {HOME POSITION}.
– The HOME POSITIONING window appears.
3. Select {DISPLAY} under the menu,
or select "PAGE" to display the selection window for the control group,
or press .
– The pull-down menu appears.
PAGE
GO BACK
PAGE
GO BACK