YASKAWA DX100 Service Manual

9Error
DX100 9.1 Error Message List
9-19
8205 - ENABLE Unit over
8206 - FLASH access error
8210 - IO module configuration is not
modified
8211 - OPTION, BOARD or MODULE
SETUP is not completed.
8212 - Cannot change setting (Function
conflict
8213 - Check EXTERNAL IO setup
Error No. Data Error Message Contents

YASKAWA DX100 Specifications

General

Programming Language	Inform III
Compatible Robots	Motoman robots
Operating Temperature	0-45°C
Humidity	20-80% RH (non-condensing)
Protection Class	IP20
Interface	Ethernet
Safety Standards	ANSI/RIA R15.06-1999
Pendant	Available
I/O Capacity	1024 inputs / 1024 outputs
Storage Temperature	-10-60°C