YASKAWA DX100 Service Manual

8Alarm
DX100 8.2 Alarm Display
8-4
(3) Independent Control Function (Optional)
In the independent control function (multi-task job), the tasks that were
being done when the alarm occurred are also displayed.
TASK#0: Master-task job
TASK#1: Sub-task1 job (SUB1)
TASK#2: Sub-task2 job (SUB2)
TASK#3: Sub-task3 job (SUB3)
TASK#4: Sub-task4 job (SUB4)
TASK#5: Sub-task5 job (SUB5)
TASK#6: Sub-task6 job (SUB6)
TASK#7: Sub-task7 job (SUB7)
TASK#8: Sub-task8 job (SUB8)
TASK#9: Sub-task9 job (SUB9)
TASK#10: Sub-task10 job (SUB10)
TASK#11: Sub-task11 job (SUB11)
TASK#12: Sub-task12 job (SUB12)
TASK#13: Sub-task13 job (SUB13)
TASK#14: Sub-task14 job (SUB14)
TASK#15: Sub-task15 job (SUB15)

YASKAWA DX100 Specifications

General

Programming Language	Inform III
Compatible Robots	Motoman robots
Operating Temperature	0-45°C
Humidity	20-80% RH (non-condensing)
Protection Class	IP20
Interface	Ethernet
Safety Standards	ANSI/RIA R15.06-1999
Pendant	Available
I/O Capacity	1024 inputs / 1024 outputs
Storage Temperature	-10-60°C