7.2 MECHATROLINK Communications Settings
7.2.2 MECHATROLINK Detail Definition Dialog Box Details
7-14
Status Tab Page
This tab page displays the MECHATROLINK transmission status. The displayed settings can-
not be changed.
STS
In Online Mode, MECHATROLINK transmission status is displayed in hexadecimal.
The meaning of each bit is given below.
The items displayed on the Status Tab Page are the same as those on the Link Assignment
Tab Page except for STS.
In Offline Mode, nothing is displayed.
FEDCBA9876543 210
Normal transmission
Reserved
Reserved
Model code
(01 hex: Inverter, 02 hex: Servo or Stepping Motor Drive, 03 hex: I/O)
Low-speed scan transmission error
Duplicate Address
High-speed scan transmission error
To Next Page
Loading...
