YASKAWA SVC - Page 536

10.4 Main Commands and Subcommands
10.4.4 Subcommand Details
10-34
 Setting Parameters
 Monitor Parameters
Read Fixed Parameters
 Description
Reads out the set data of the specified fixed parameter.
 Setting Parameters
 Monitor Parameters
Name Register No. Setting Range Remarks
Sub Command OW0A 0 to 65535 08: Transmission Reference
Transmission Reference Output
Data 16
OW70 0 to FFFFH Subcommand output data bytes 0 and 1
.
.
.
.
.
.
−−
Transmission Reference Output
Data 31
OW7F 0 to FFFFH −
Name Register No.
Setting
Range
Remarks
Subcommand Response Code IW0A 0 to 65535 08: Transmission Reference
Subcommand Status IW0B Bit
Bit 0 (Command execution
flag)
ON during
execution
Bit 3 (Command error com-
pleted status)
Always OFF
Bit 8 (Command execution
completed)
Always OFF
Transmission Reference Input
Data 16
IW70 0 to FFFFH Subcommand input data bytes 0 and 1
.
.
.
.
.
.
0 to FFFFH −
Transmission Reference Input
Data 31
IW7F 0 to FFFFH −
Name Register No. Setting Range Remarks
Sub Command OW0A 0 to 65535 09: Read Fixed Parameters
Fixed Parameter Number OW48 0 to 63 Set the fixed parameter number.
Name Register No.
Setting
Range
Remarks
Subcommand Response
Code
IW0A 0 to 65535 09: Read Fixed Parameters
Subcommand Status IW0B Bit
Bit 0 (Command execution
flag)
ON during execu-
tion
Bit 3 (Command error com-
pleted status)
ON when an error
occurs during
command pro-
cessing.
Bit 8 (Command execution
completed)
OFF during exe-
cution, and ON
when execution
is completed.
Fixed Parameter Monitor IL48
-2
31
to 2
31
−1
−