YASKAWA SVC - Page 556

10.5 Motion Parameter Details
10.5.3 Monitor Parameter List
10-54
IW12 Output Current
Reports the output current from the Inverter.
Unit: Inverter rated current/8,192.
You can check the current unit setting in the Unit
monitor parameter (IW06).
IW
13 Motor Speed (Option)
Reports the motor speed during operation.
Unit: According to the O1-03 Inverter parameter.
You can check the current unit setting in the Unit
monitor parameter (IW06).
IW
14 Torque Reference (Option)
Reports the torque reference.
Unit: 0.1%
You can check the current unit setting in the Unit
monitor parameter (IW06).
IW
15 Encoder Count PG1 Reports the counter value.
IW
16 Frequency Reference (Option)
Reports the frequency reference from the
Inverter.
Unit: According to the O1-03 Inverter parameter.
You can check the current unit setting in the Unit
monitor parameter (IW06).
IW
17 Analog Input A2 Unit: 0.1%
IW18 Main Bus Voltage (Option) Unit: 1 VDC
IW19 Alarm Code Reports the Inverter alarm code.
IW1A Warning Code Reports the Inverter warning code.
IW1B
Multi-Function
Output Terminal
Bit 0: Terminal 1 Status 0: OFF, 1: ON
Bit 1: Terminal 2 Status 0: OFF, 1: ON
Bit 2: Terminal 3 Status 0: OFF, 1: ON
Bit 3: Terminal 4 Status 0: OFF, 1: ON
Bit 4: Terminal 5 Status 0: OFF, 1: ON
Bit 5: Terminal 6 Status 0: OFF, 1: ON
Bit 6: Terminal 7 Status 0: OFF, 1: ON
Bit 7: Terminal 8 Status 0: OFF, 1: ON
Bit 8: Terminal 9 Status 0: OFF, 1: ON
Bit 9: Terminal 10 Status 0: OFF, 1: ON
Bit A: Terminal 11 Status 0: OFF, 1: ON
Bit B: Terminal 12 Status 0: OFF, 1: ON
Bits C to F Reserved
IW1C Analog Input A3 Unit: 0.1%
IW1D
Multi-Function
Input Terminal
Bit 0: Terminal 1 Status 0: OFF, 1: ON
Bit 1: Terminal 2 Status 0: OFF, 1: ON
Bit 2: Terminal 3 Status 0: OFF, 1: ON
Bit 3: Terminal 4 Status 0: OFF, 1: ON
Bit 4: Terminal 5 Status 0: OFF, 1: ON
Bit 5: Terminal 6 Status 0: OFF, 1: ON
Bit 6: Terminal 7 Status 0: OFF, 1: ON
Bit 7: Terminal 8 Status 0: OFF, 1: ON
Bits 8 to F Reserved
IW1E Analog Input A1 Unit: 0.1%
IW1F Encoder Count PG2 Reports the count value.
IW20 Monitor data set in F6-23
Reports the result of the monitor set in the F6-23
Inverter parameter.
IW
21 Monitor data set in F6-24
Reports the result of the monitor set in the F6-24
Inverter parameter.
Continued on next page.
Continued from previous page.
Register
No.
Name Description