YOKOGAWA SL1400 - Entering Values and Strings

4-3
IM 701240-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Common Operations
4.2 Entering Values and Strings
Entering Values
Entering Values Directly Using the Dedicated Knob
The dedicated knobs indicated below can be turned to directly enter values.
• Range knob
• Position knob
ALL CH
ALL CH
RANGE
RANGE
POSITION
POSITION
TRIG'D
TRIG'D
MANUAL TRIG
MANUAL TRIG
CH
CH
RANGE
RANGE
FINE
FINE
POSITION
POSITION
FINE
FINE
Entering Values Using the Jog Shuttle
After selecting the setup item using the soft key, use the jog shuttle to change the value.
The outer shuttle ring can be used to step through the values in large increments. On
some items, the arrow keys below the jog shuttle can be used to move among the digits.
Parameters that can be specified
using the jog shuttle
Resets the value to the initial value.
Arrow keys: Changes the current digit.
Jog shuttle
Shuttle ring
Increases the value.
Decreases the value.
RESET SELECT
Note
The items that can be changed using the jog shuttle are reset to their initial values when you
press RESET.