YOKOGAWA SL1400 - Performing Auto Setup

4-17
IM 701240-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Common Operations
4.5 Performing Auto Setup
<For a description of this function, refer to page 2-49.>
Procedure
Executing Auto Setup
1. Apply the signal to be measured.
2. Press MENU.
3. Press the Next 1/2 soft key.
4. Press the INITIALIZE/CAL soft key.
5. Press the Trace soft key. The channel selection menu appears. The menu does
not appear for channels without modules.
6. Turn the jog shuttle+SELECT to select the target channel.
7. Press the Auto Setup soft key. Auto setup is executed.
When auto setup is executed, waveform acquisition starts automatically.
Canceling Auto Setup
8. Press the Auto Setup Undo soft key. The settings are set back to the original
condition.
Execute auto setup
Cancel auto setup