YOKOGAWA SL1400 - Chapter 15 Ethernet Interface (Option); Connecting the SL1400 to the Network

15-1
IM 701240-01E
Ethernet Interface (Option)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
15
16
17
18
App
Index
Chapter 15 Ethernet Interface (Option)
15.1 Connecting the SL1400 to the Network
Ethernet Interface Specifications
A 100BASE-TX port is provided on the left side panel of the SL1400.
Item Specifications
Number of communication ports 1
Electrical and mechanical specifications Conforms to IEEE802.3
Transmission system Ethernet (100BASE-TX/10BASE-T)
Transmission rate 100 Mbps max.
Communication protocol TCP/IP
Supported services FTP server, FTP client (network drive), LPR client
(network printer), SMTP client (mail transmission),
DHCP, DNS, and Web server
Connector type RJ-45 connector
100BASE-TX
LINK
ACT
ETHERNET 100BASE-TX port
RJ-45 modular jack
ACT LED
Blinks when packet transmission is
being carried out normally.
LINK LED
Illuminates when the link between the
port on the SL1400 and the
connected device is established and
communication is mutually possible.
Items Necessary for Connection
Cable
Be sure to use one the following cables for connection.
• UTP (Unshielded Twisted-Pair) cable (category 5 or better)
• STP (Shielded Twisted-Pair) cable (category 5 or better)