EasyManua.ls Logo

YOKOGAWA SL1400 - Left Side Panel

YOKOGAWA SL1400
589 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-4
IM 701240-01E
Left Side Panel
Used to perform communications
with a personal computer (PC)
via the RS-232 interface.
For a description on how to use the
terminal, see the Communication
Interface User’s Manual.
Vent holes
GP-IB connector
Used to perform communications via
the GP-IB interface. For a description
on how to use the terminal, see the
Communication Interface User’s Manual.
PC card slot
Used to save data to a PC card.
For a description on how to use
the terminal, see section 13.2.
Video signal output
terminal
Outputs the displayed
image using SVGA RGB
signals. For a description
on how to use the terminal,
see section 14.4.
Ethernet port
(100BASE-TX)
Used to connect to a LAN.
For a description on how to use
the terminal, see section 15.1.
Main power switch
For the power ON/OFF
operation, see section 3.4.
Name plate
Power connector
For details on connecting
the power, see section 3.4.
SCSI connector
Used to connect to a SCSI device
such as a SCSI hard disk.
For a description on how to use
the terminal, see section 13.5.
USB connector for a personal
computer (PC)
Used to connect a PC with a USB
interface.
For a description on how to use
the terminal, see the Communication
Interface User’s Manual.
External start/stop input
connector
Used to externally control the
start/stop of the SL1400.
For a description on how to use
the terminal, see section 14.5.
USB connector for peripherals
Used to connect a USB keyboard, USB
printer, USB mouse, or USB storage.
For a description on how to use the
terminal, see sections 4.3 and 12.2.
Logic signal input connector
Used to measure logic signals.
For a description on how to use
the terminal, see section 3.12.
Trigger output/external clock
input terminal
Trigger input terminal
RS-232 interface connecter
Used to input external trigger signals.
For a description on how to use the
terminal, see section 14.1.
Used to output trigger signals or input
clock signals.
For a description on how to use the
terminal, see sections 14.2 and 14.3.
GP-IB
(
IEEE488
)
ON
100-120V/200-240V AC
300VA MAX 50/60Hz
POWER
100BASE-TX
VIDEO OUT
(
SVGA
)
SERIAL
(RS-232)
USB
USB PERIPHERAL
LOGIC B
TRIG OUT/
EXT CLK IN
LINK
ACT
SCSI
LOGIC A
OFF
START/
STOP
TRIG IN
Made in Japan
MODEL
SUFFIX
NO.
1.1 Panels

Table of Contents

Related product manuals