YOKOGAWA SL1400 - Setting the B > Time, B < Time, or B Timeout (Pulse Width) Trigger (ENHANCED)

6-30
IM 701240-01E
6.14 Setting the B > Time, B < Time, or B Timeout
(Pulse Width) Trigger (ENHANCED)
<For a description of this function, refer to page 2-20.>
Procedure
1. Press MENU.
2. Press the TRIGGER soft key.
3. Press the Trigger Cond. Setup soft key.
4. Press the Select soft key to select Enhanced.
Setting the Trigger Type
5. Press the Type soft key. The trigger type selection menu appears.
6. Use the jog shuttle+SELECT to select B > Time, B < Time, or B TimeOut.
Setting the Condition B Pattern
7. Press the Set Pattern soft key. The B > Time trigger, B < Time trigger, and B
TimeOut trigger setup menu appears.
8. Use jog shuttle+SELECT to select the pattern of each channel (CH1 to CH16)
from H, L, and X. For logic input channels, select Disable or Enable.
Setting the Pulse Width
9. Use jog shuttle+SELECT to set Time. Pressing RESET resets the value to 0.1
µs.