YOKOGAWA SL1400 - Recording X-Y Waveforms

9-17
IM 701240-01E
Recording in Recorder Mode
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Setting Whether to Print the Scale
13. Use jog shuttle+SELECT to turn the scale ON or OFF.
Setting Whether to Display the Pointer
14. Use jog shuttle+SELECT to turn the pointer ON or OFF.
If you select ON, a pointer indicating the most recent recording position appears
on the screen. It is not printed on the printer.
Selecting the Print Font Size
15. Use jog shuttle+SELECT to select the print font size.
Setting a Comment
16. Use jog shuttle+SELECT to select Comment. Then, enter the comment you
want to print using up to 20 characters according to the procedure in section 4.2.
Starting the X-Y Waveform Recording
17. Press START/STOP. The waveform acquisitions starts, and the screen shows
the X-Y waveform.
Stopping the X-Y Waveform Recording
18. Press START/STOP while the waveform acquisition is in progress. The
waveform acquisition stops. If auto print is turned ON in step 7, the X-Y
waveform recording starts when the data acquisition stops.
Note
If auto print turned OFF, the X-Y waveform is not automatically printed. You can use the reprint
function to print the X-Y waveform (see section 9.7).
Explanation
Sample Rate
Select the sample rate from the following:
5 S/s, 10 S/s, 20 S/s, 50 S/s, 100 S/s, 200 S/s, 500 S/s, 1 kS/s, 2 kS/s, or 5 kS/s
Interpolation
Set the interpolation method to OFF or Line. For details on the interpolation method, see
section 8.2.
9.6 Recording X-Y Waveforms