13-56
IM 701240-01E
13.17 Copying Files
CAUTION
Never remove the storage medium (disk) or turn OFF the power while the
access indicator or the PC card, internal hard disk (option), or USB storage
device icon is blinking. Such acts can damage the storage medium or destroy
the data on the medium.
Procedure
1. Press FILE.
2. Press the Utility soft key. The Utility setup menu and the File List window
appear.
3. Press the Function soft key. The file function selection menu is displayed.
4. Press the Copy soft key.
Selecting Media and Directories
5. Select the medium and directory according to steps 6 to 9 in section 13.9,
“Saving/Loading the Setup Data.”
Selecting the Copy Source Files One at a Time
6. Turn the jog shuttle to select the file.
7. Press the Set/Reset soft key. An asterisk (*) to the left of the selected file to
indicate that it will be copied. Pressing the Set/Reset soft key again removes
the asterisk (*) to the left of the selected file. The file will not be copied.
Proceed to step 11.
To Next Page
Loading...
Need help?
General
