13-28
IM 701240-01E
13.10 Saving/Loading Snapshot Waveforms
CAUTION
Never remove the storage medium (disk) or turn OFF the power while the
access indicator or the PC card or internal hard disk (option) icon is blinking.
Such acts can damage the storage medium or destroy the data on the medium.
Procedure
Saving Snapshot Waveforms
1. Press FILE.
2. Press the File Item soft key. The File Item setup menu appears.
3. Press the Snap soft key.
Selecting Save Destination Medium
4. Press the Save soft key. The save setup menu appears.
5. Press the File List soft key. The File List window appears.
6. Turn the jog shuttle to select the save destination medium (indicated by
brackets).
7. Press SELECT to confirm the storage medium.
Selecting the Destination Directory
(Perform this operation when directories are present on the medium.)
8. Turn the jog shuttle to select the save destination directory (indicated by < >).
9. Press SELECT to confirm the directory. The selected medium/directory is
displayed in “Path=......” located above and to the left of the File List window.
Select <..> to move to the parent directory.
To Next Page
Loading...
