5-21
IM 701240-01E
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Horizontal and Vertical Axes
5.12 Inverting the Waveforms
<For a description of this function, refer to page 2-10.>
Procedure
Selecting the Channel
1. Press CH.
2. Press one of the soft keys from CH1 to CH16.
For the displayed menus when this operation is executed, see section 5.1.
Turning Waveform Inversion ON/OFF
3. Press the Next 1/2 soft key.
4. Press the Invert soft key to select ON.
Turn waveform inversion
ON/OFF
Explanation
The input signals to CH1 to CH16 can be inverted independently.
The waveform is inverted around the vertical position.
Note
• Cursor measurements, automated measurement of waveform parameters, and computation
are performed on the inverted waveform.
• The trigger function is executed on the original waveform even if the waveform is inverted.
• When measuring strain, inversion is not possible on waveforms after measurements. The
invert ON/OFF change takes effect in the next measurement.
To Next Page
Loading...
