YOKOGAWA SL1400 - Setting up the TCP;IP

15-3
IM 701240-01E
Ethernet Interface (Option)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
15
16
17
18
App
Index
15.2 Setting up the TCP/IP
Procedure
1. Press MENU.
2. Press the Next 1/2 soft key.
3. Press the Network soft key.
4. Press the TCP/IP Setup soft key. The TCP/IP setup menu appears.
Turning DHCP ON/OFF
5. Use jog shuttle+SELECT to set DHCP to ON or OFF.
If you DHCP to OFF, proceed to step 5.
If the DHCP is set to ON, you do not have to set the IP address, subnet mask,
and default gateway.
• To set up the DNS, proceed to step 12.
• If you do not want to set up the DNS, check the network cable connection
and restart the SL1400. The IP address, subnet mask, and default gateway
are automatically configured.
Setting the IP Address
Set the IP address if you turned DHCP OFF.
6. Use jog shuttle+SELECT to set the IP Address. Enter using values in the range
of 0 to 255.
Setting the Subnet Mask
Set the subnet mask if you turned DHCP OFF.
7. Use jog shuttle+SELECT to set the Net Mask. Enter using values in the range
of 0 to 255.
Setting the Default Gateway
Set the default gateway if you turned DHCP OFF.
8. Use jog shuttle+SELECT to set the Gate Way. Enter using values in the range
of 0 to 255.
Automatically configured
when DHCP is turned ON.