15-44
IM 701240-01E
15.8 Setting the Time Difference from GMT
(Greenwich Mean Time)/SNTP
Procedure
1. Press MENU.
2. Press the Next 1/2 soft key.
3. Press the Network soft key.
4. Press the Others soft key. The Others setup menu appears.
Setting the Time Difference from GMT
5. Use jog shuttle+SELECT to set the Time Hour of Time Difference From GMT in
the range of –12 to 13.
6. Likewise, set the Minute of Time Difference From GMT in the range of 0 to 59.
Note
Minute can be specified only if Time Hour is set in the range of –11 to 12. (Minute cannot be
specified if Time Hour is set to –12 or 13.)
Setting the SNTP (Simple Network Time Protocol)
7. Use jog shuttle+SELECT to set the Exec at Power On to ON or OFF.
8. Use jog shuttle+SELECT to select SNTP Server.
9. Enter the IP address of the SNTP server according to the procedure given in
section 4.2.
10. Use jog shuttle+SELECT to select Time Out.
11. Enter the time out time in the range from 1-60 according to the procedure given
in section 4.2.
To Next Page
Loading...
