YOKOGAWA SL1400 - Creating PDF Files of the Printed Image

13-43
IM 701240-01E
Saving and Loading Data
3
2
1
4
5
6
7
8
9
10
11
12
13
13
14
15
16
17
18
App
Index
13.14 Creating PDF Files of the Printed Image
Procedure
1. Press MENU.
2. Press the PRINT soft key.
Selecting the Print Destination
3. Press the Print to soft key. The print destination selection menu appears. (Net
Print appears only when the Ethernet interface option is installed.)
4. Press the PDF soft key.
When displaying T-Y waveforms, proceed to step 5.
When displaying X-Y waveforms, proceed to step 9.
Selecting the Section to Be Output to the PDF File (Only When Displaying the T-Y
Waveform)
5. Press the Time Range1/Time Range2 soft key.
6. Use jog shuttle+SELECT to set the output start point and output end point of
the section to be output to the PDF file.
Setting the Print Magnification (Only When Displaying the T-Y Waveform)
7. Press the Print Mag soft key.
8. Use the jog shuttle to set the magnification along the time axis when creating
the PDF file. The top section of the menu shows the record time corresponding
to 10 divisions when creating the PDF file; the bottom section shows the number
of pages when the PDF file is created using the record time indicated in the top
section.
When Displaying
the T-Y Waveform
When Displaying
the X-Y Waveform