13-50
IM 701240-01E
13.15 Loading/Converting Realtime Recorded
Waveforms
<For a description of this function, refer to page 2-31.>
Procedure
Loading the Realtime Recorded Waveform Data
1. Press FILE.
2. Press the File Item soft key. The File Item setup menu appears.
3. Press the Waveform soft key.
Selecting the Data Type
4. Press the Data Type soft key. The data type selection menu appears.
5. Press the Real Time soft key.
Selecting the Load Source Medium/Directory
6. Press the Load soft key. The load setup menu and File List window appear.
7. Select the load source directory according to steps 14 to 17 in “Saving the
Waveform Data” in section 13.8.
Note
The files that have been realtime recorded are saved in the [RealTime] drive. WDF data that
is copied from the [RealTime] drive to another drive can also be loaded.
Selecting the File to Be Loaded
8. Turn the jog shuttle to select the file.
To Next Page
Loading...
