15-47
IM 701240-01E
Ethernet Interface (Option)
15
15.10 Setting the FTP Passive Mode and LPR/SMTP
Timeout
Procedure
1. Press MENU.
2. Press Next 1/2 soft key.
3. Press the Network soft key.
4. Press the Others soft key. The Others setup menu appears.
Selecting the FTP Passive Mode
5. Use jog shuttle+SELECT to set FTP Passive to ON or OFF.
Setting the LPR Timeout Time
5. Use jog shuttle+SELECT to set LPR Time Out.
Setting the SMTP Timeout Time
5. Use jog shuttle+SELECT to set SMTP Time Out.
Explanation
Special settings related to the FTP client, LPR, and SMTP are entered. Normally, these
parameters do not need to be specified.
Turning ON/OFF FTP Passive Mode
Turn this function ON when using the SL1400 behind a firewall that requires the passive
mode. The default setting is OFF. (A firewall is furnished on a system that has security
features. It prevents intrusion from the outside into the network system.)
Setting the LPR Time Out
The SL1400 closes the connection to the printer if there is no response from the printer
for a certain period of time (timeout time) when it accesses the printer. You can set the
timeout value in the range of 0 to 3600 s. The default setting is 15 s.
Setting the SMTP Time Out
When a mail server is accessed from the SL1400 and connection cannot be established
after a certain period of time (timeout time), the SL1400 decides that the connection to
the mail server is not possible and closes the connection. You can set the timeout value
in the range of 0 to 3600 s. The default setting is 15 s.
To Next Page
Loading...
Need help?
General
