YOKOGAWA SL1400 - Waveform Display and Information Display

8-1
IM 701240-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Waveform Display and Information Display
8.1 Changing the Display Format
<For a description of this function, refer to page 2-32.>
Procedure
1. Press DISPLAY.
Setting the Display Format
2. Press the Format soft key.
3. Press one of the soft key from 1 Zone to 16 Zone to select the format.
Setting the Waveform Mapping
4. Press the Next 1/2 soft key.
5. Press the Mapping soft key to select Auto, Fixed, or User. If you select User,
proceed to step 6.
6. Press the Set Mapping soft key. The waveform mapping setup menu appears.
7. Use jog shuttle+SELECT to set the mapping number of each channel.
When Mapping is set to User
Chapter 8 Waveform Display and Information Display