YOKOGAWA SL1400 - Setting the Edge on a Trigger (ENHANCED)

6-23
IM 701240-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Triggering
6.12 Setting the Edge on A Trigger (ENHANCED)
<For a description of this function, refer to page 2-19.>
Procedure
1. Press MENU.
2. Press the TRIGGER soft key.
3. Press the Trigger Cond. Setup soft key.
4. Press the Select soft key to select Enhanced.
Setting the Trigger Type
5. Press the Type soft key. The trigger type selection menu appears.
6. Use jog shuttle+SELECT to select Edge on A.
Setting Condition A
7. Press the Set Pattern soft key. The Edge on A trigger setup menu appears.
Setting the Condition A Pattern
8. Use jog shuttle+SELECT to select the pattern of each channel (CH1 to CH16)
from H, L, and X. For logic input channels, select Disable or Enable.
Setting the Condition A Condition
9. Use jog shuttle+SELECT to set Condition to True or False.
Setting the Edge Trigger OR
10. Use jog shuttle+SELECT to select the edge trigger OR status of each channel
(CH1 to CH16) from , , and –. For logic input channels, select Disable or
Enable.