YOKOGAWA SL1400 - Searching History Memory Data Using Parameters (History Search Function)

11-8
IM 701240-01E
11.3 Searching History Memory Data Using
Parameters (History Search Function)
<For a description of this function, refer to page 2-43.>
Procedure
1. Press HISTORY.
2. Press the Search Mode soft key. The search mode menu appears.
3. Press the Parameter soft key.
Setting the Search Zone
4. Press the Search Setup soft key. The search setup menu appears.
5. Press the Select Param soft key. The search condition selection menu appears.
6. Press any of the Param1 to Param4 soft keys to select the parameter to which
to set the search condition.
Setting the Search Condition
7. Press the Condition soft key to select OFF, IN, or OUT.
Setting the Source Channel
8. Press the Item Setup soft key. The parameter selection menu appears.
9. Use jog shuttle+SELECT to select the trace channel.
10. Use jog shuttle+SELECT to select the parameter.