YOKOGAWA SL1400 - Setting the or Trigger (ENHANCED)

6-27
IM 701240-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Triggering
6.13 Setting the OR Trigger (ENHANCED)
<For a description of this function, refer to page 2-19.>
Procedure
1. Press MENU.
2. Press the TRIGGER soft key.
3. Press the Trigger Cond. Setup soft key.
4. Press the Select soft key to select Enhanced.
Setting the Trigger Type
5. Press the Type soft key. The trigger type selection menu appears.
6. Use jog shuttle+SELECT to select OR.
Setting the Edge Trigger OR
7. Press the Set Pattern soft key. The OR trigger setup menu appears.
8. Use jog shuttle+SELECT to select the edge trigger OR status of each channel
(CH1 to CH16) from
, , and –. For logic input channels, select Disable or
Enable.