15-11
IM 701240-01E
Ethernet Interface (Option)
15
15.4 Setting up the Network Printer (LPR Client
Function)
<For a description of this function, refer to page 2-47.>
Procedure
1. Press MENU.
2. Press the Next 1/2 soft key.
3. Press the Network soft key.
4. Press the Net Print Setup soft key. The Net Print setup menu appears.
Setting the LPR Server
5. Use jog shuttle+SELECT to select LPR Server.
6. Enter the IP address of the printer server according to the procedure given in
section 4.2. If you are using DNS, you can specify the printer server by name.
Setting the Printer Name
7. Use jog shuttle+SELECT to select LPR Name.
8. Enter the printer name according to the procedure given in section 4.2.
Printing the Screen Image Data
9. Print the screen image data according to the procedure given in section 12.3.
Note
• To use this function, configure the TCP/IP settings beforehand according to section 15.2.
• Output is possible to printers or printer servers that support the TCP/IP protocol.
• This function cannot be used when using the FTP server function or the Web server
function, or when performing file operations.
To Next Page
Loading...
Need help?
General
