YOKOGAWA SL1400 - Setting the Logic Trigger (SIMPLE)

6-15
IM 701240-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Triggering
6.9 Setting the Logic Trigger (SIMPLE)
<For a description of this function, refer to page 2-17.>
Procedure
1. Press MENU.
2. Press the TRIGGER soft key.
3. Press the Trigger Cond. Setup soft key.
4. Press the Select soft key to select Simple.
Setting the Trigger Source
5. Press the Source soft key. The trigger source selection menu appears.
6. Use jog shuttle+SELECT to select Logic A or Logic B.
Specifying the Bit for Assigning the Trigger Slope
7. Press the Logic Bit soft key. The bit selection menu appears.
8. Use jog shuttle+SELECT to set the bit to assign the trigger slope.
Setting the Trigger Slope
9. Press the Slope soft key to select or .
Setting the Hold Off
10. Set the hold off time according to the procedures given in section 6.4.