YOKOGAWA SL1400 - Setting the Date and Time

3-13
IM 701240-01E
3
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
App
Index
Preparations for Measurements
3.6 Setting the Date and Time
Procedure
1. Press MENU.
2. Press the Next 1/2 soft key.
3. Press the System Config soft key.
4. Press the Date/Time soft key. The Date/Time dialog box opens.
Turning ON/OFF the Date/Time display
5. Use jog shuttle+SELECT to set Display to ON or OFF.
Setting the Time and Date Manually (Manual)
6. Use jog shuttle+SELECT to set Type to Manual.
7. Use jog shuttle+SELECT to set Date Year.
8. Likewise, set the Month, Day, Time Hour, Minute, and Second.
9. Use the jog shuttle to move the cursor to Set and press SELECT. The date and
time specified in steps 6 to 8 are applied.
Setting the Date and Time Using the SNTP Server (Option)
To obtain the time from the SNTP server, you must first connect to the network and
then to the SNTP server. For details, see sections 15.2 and 15.8.
10. After step 5, use jog shuttle+SELECT to set Type to SNTP.
11. Use jog shuttle+SELECT to set Time Hour under Time Difference from GMT.
12. Likewise, set Minute.
13. Use the jog shuttle to move the cursor to Set and press SELECT. The time is
obtained from the SNTP server, and the date and time calculated from the
specified GMT time difference are set.