4-16
IM 701240-01E
Explanation
The values specified by the keys can be reset to the factory default values. This is useful
when you want to clear previous settings or start the measurement from scratch.
Initialization
Initialization
refers to the act of restoring the factory default condition.
For a list of the factory default settings, see appendix 6.
Settings That Cannot Be Initialized
• Date and time settings
• Settings related to communications and Ethernet interface
• SCSI ID number setting
• Menu/message language setting
• Setting of the time difference from GMT
• ON/OFF setting of the internal hard disk motor
Canceling Initialization
If you initialize the settings by mistake, you can press the Initialize Undo soft key to
revert to the condition that existed before initialization.
Initializing All the Settings
Turning ON the power switch while holding down RESET also initializes settings related
to communications and Ethernet interface and SCSI ID settings. The stored setup data
(see section 13.1) is cleared. If you initialize the SL1400 in this fashion, the settings
cannot be set back to their original condition.
4.4 Initializing Settings
To Next Page
Loading...
