xiii
IM 701240-01E
Display the waveform and information
Display the waveform and information
• Set the waveform display conditions Sections 8.1 to 8.4 and 8.8
• Zoom and auto scroll the waveform Section 8.5
• Display the X-Y waveform Section 8.6
• Snapshot and clear trace Section 8.7
• Set the information display conditions Sections 8.9 to 8.13
Acquiring Waveforms
• Acquisition mode Sections 7.2 and 7.3
• Start/Stop the waveform acquisition Section 7.1
Recording in Recorder Mode
Recording in Recorder Mode
• Select the recorder mode Section 9.1
• Perform T-Y waveform recording Sections 9.2 to 9.4
• Perform numeric value recording Section 9.5
• Perform X-Y waveform recording Section 9.6
• Reprint on the built-in printer Section 9.7
• Create a PDF file of the reprint image Section 9.8
Setting the Trigger
• Trigger type* (simple/enhanced) Sections 6.5 to 6.17
• Trigger source, trigger slope,
trigger level, etc Sections 6.5 to 6.17
• Trigger mode Sections 6.1 and 7.4
• Trigger position Section 6.2
• Trigger delay Section 6.3
From the previous page
* Simple trigger
• Input signal trigger Sections 6.5
and 6.9
• External trigger Section 6.6
• Line trigger Section 6.7
• Time trigger Section 6.8
Enhanced trigger
• A → B(N) trigger Section 6.10
• A Delay B trigger Section 6.11
• Edge on A trigger Section 6.12
• OR trigger Section 6.13
• B > Time, B < Time, and B
Timeout trigger Section 6.14
• Periodic trigger Section 6.15
• Window trigger Section 6.16
• Wave window trigger Section 6.17
• Realtime recording to the
internal hard disk (option) Section 7.5
• Acquisition memory
backup Section 7.7
Continues to “Waveform Computation, Analysis, and
Search” on the next page
Flow of Operation
To Next Page
Loading...
