IM 701240-01E
5-38
Pulse Integration
The procedure after selecting Pulse Integ in step 8 on page 5-34 is explained below.
9. Use jog shuttle+SELECT to set the physical amount per pulse (Unit/Pulse).
10. Use jog shuttle+SELECT to select the method for resetting the integrated value
of the pulse count.
• Over Limit Reset: ON
Automatically resets the pulse count when the range is exceeded.
• Over Limit Reset: OFF
You can manually reset the pulse count.
11. As necessary, use jog shuttle+SELECT to set the unit, smoothing filter, and
pulse average.
For the procedure to set the character string of the unit, see section 4.2.
Smoothing filter
Moving average order of smoothing
Manually reset the pulse count
Reset method of the pulse count
Pulse average
Pulse average count
Physical amount per pulse
Unit
Setting the Measurement Range
12. Turn the RANGE knob to set the measurement range.
You can also set the measurement range by pressing the Range soft key and turning the
jog shuttle.
Velocity
The procedure after selecting Velocity in step 8 on page 5-34 is explained below.
9. Use jog shuttle+SELECT to set the distance per pulse.
10. Use jog shuttle+SELECT to select the time unit for calculating the velocity.
11. As necessary, use jog shuttle+SELECT to set the unit, smoothing filter, pulse
average, deceleration prediction, and stop prediction.
For the procedure to set the character string of the unit, see section 4.2.
Smoothing filter
Moving average order of smoothing
Pulse average
Pulse average count
Distance per pulse
Time unit and unit
Stop prediction
Deceleration prediction
Setting the Measurement Range
12. Turn the RANGE knob to set the measurement range.
You can also set the measurement range by pressing the Range soft key and turning the
jog shuttle.
5.17 Setting the Frequency (Number of Rotations, Period, Duty Cycle, Power Supply Frequency, Pulse
Width, Pulse Integration, and Velocity) Measurement
To Next Page
Loading...
