7-12
IM 701240-01E
• The maximum number of files that can be created in the realtime recording area of the
internal hard disk is 128. If the number of files reaches 128, delete unneeded files by
operating the SL1400. You can also copy the files to an area outside the realtime
recording area of the internal hard disk or to other storage media.
• If you specify a setting that exceeds the number of files that can be created in the
realtime recording area (for example, if Sequence is set to Continue and Count is set
to 30 when there are already 100 files in the realtime recording area), realtime
recording is not possible. In addition, realtime recording is not possible if there is not
enough free space in the realtime recording area.
• Zoom waveforms can be displayed using the ZOOM menu while realtime recording is
in progress. However, there is a limitation on the number of display points that can be
expanded depending on the record length.
Record Length Number of Display Points That Can Expanded
1 MW to 10 MW Record time in which the number of displayed points is 250 k or more
25 MW Record time in which the number of displayed points is 500 k or more
50 MW Record time in which the number of displayed points is 1 M or more
7.5 Realtime Recording to the Internal Hard Disk (Option)
To Next Page
Loading...
