1-2
IM 701240-01E
Right Side Panel
Built-in printer
Stand
Probe power
supply terminal
Used to supply power (±12 V)
to the probes when using
current probes.
For the probe connection
procedure, see section 3.7.
Functional ground terminal
Used to connect the ground
line from the high-voltage
differential probe or enhance the
grounding of the measurement
system. For the probe connection
procedure, see section 3.7.
Input module installation slot
A total of eight slots in the top and bottom rows.
For the installation and removal procedure of
input modules, see section 3.3.
Empty slot protection
cover panel
Attached to the slots that are
not used.
For the installation procedure,
see section 3.2.
CH1
ON
OFF
PROBE
POWER
( 12V)
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
Input module connector
Acquisition memory backup ON/OFF
Tu rns ON/OFF the battery power for backing
up the acquisition memory.
For the acquisition memory backup function,
see section 7.7.
CH3
CH4
Input channel
arrangement
Slot 1 2 3 4
Slot 5 6 7
8
CH1
CH2
CH7
CH8
CH5
CH6
CH11
CH12
CH9
CH10
CH15
CH16
CH13
CH14
ACQ
MEMORY
BACKUP
1.1 Panels
To Next Page
Loading...
