9-13
IM 701240-01E
Recording in Recorder Mode
9
10
11
12
13
14
15
16
17
18
App
Index
9.5 Recording Numeric Values
<For a description of this function, refer to page 2-37.>
Procedure
Before carrying out the procedure below, select Chart Recorder mode according to the
procedures in section 9.1.
1. Press MENU.
2. Press the RECORD COND soft key.
3. Press the Print Style soft key to select Numeric.
4. Press the Print Setup soft key. The print setup dialog box opens.
Setting the Output Destination
5. Use jog shuttle+SELECT to select the output device.
Setting the Output Interval
6. Use jog shuttle+SELECT to select the interval.
If you select Chart in step 5, proceed to step 7.
If you select File in step 5, proceed to step 8.
Setting the Print Direction (If Chart Is Selected in Step 5)
7. Use jog shuttle+SELECT to select the direction.
Proceed to step 11.
Setting the Output File (If Chart Is Selected in Step 5)
Setting the Auto Naming Function
8. Use jog shuttle+SELECT to select the auto naming method of the file name.
Setting the File Name
9. Use jog shuttle+SELECT to select File Name. Then, enter the file name using
up to 16 characters according to the procedure in section 4.2.
Selecting the File Output Destination
10. Use jog shuttle+SELECT to select File List. Then, select the file output
destination according to steps 14 to 17 in section 13.8. Proceed to step 11.
To Next Page
Loading...
