9-26
IM 701240-01E
Explanation
Print to
When creating a PDF file of the waveform recorded in Chart Recorder mode (T-Y
recording) or X-Y Recorder mode (X-Y recording), set the print destination to PDF.
Selecting the Section to Be Output to the PDF File (Window Mag/Window
Pos and Start Point/End Point)
Can be specified only in Chart Recorder mode. These are the same as Window Mag/
Window Pos and Start Point/End Point when reprinting on the built-in printer. See page
9-22.
Print Mag
Can be specified only in Chart Recorder mode. This is the same as Print Mag when
reprinting on the built-in printer. See page 9-22.
Setting the PDF File
Paper Size
Select the paper size from built-in printer size, A3, A4, and A5. If the built-in printer
size is selected, a PDF file is created of an image similar to the printed output on the
built-in printer.
Orientation
If the paper size is set to A3, A4, or A5, set the PDF orientation to Landscape or
Portrait.
Div/Page
Can be specified only in Chart Recorder mode. If the paper size is set to A3, A4, or
A5, set the number of divisions per PDF page. The image data of the specified
number of divisions is saved. The selectable range of Div/Page varies depending on
the paper size, orientation, and gauge (see section 9-9) as follows:
Paper Size Orientation Selectable Range of Div/Page
Gauge: OFF Gauge: ON
Built-in printer - 20 (fixed) 20 (fixed)
A3 Portrait 1 to 25 1 to 20
A3 Landscape 1 to 40 1 to 35
A4 Portrait 1 to 20 1 to 15
A4 Landscape 1 to 25 1 to 20
A5 Portrait 1 to 10 1 to 10
A5 Landscape 1 to 20 1 to 15
Document Information (Title, Author, Sub Title, and Keyword
As necessary, enter the title, author, sub title, and keyword of the PDF file to be
created.
Color
The PDF file is created in color if ON is selected and monochrome if OFF is selected.
Compression
Select whether to compress the file. If you select ON, the file is compressed.
However, the generation of the PDF file takes longer than when you select OFF.
9.8 Creating a PDF File of the Reprint Image
To Next Page
Loading...
