11-2
IM 701240-01E
Average Display of Selected Waveform Data
9. Press the Start Record/End Record soft key to set the jog shuttle control to
Start Record.
10. Turn the jog shuttle to set the first record No. to be averaged.
11. Likewise, set the last record No. (End Record) to be averaged.
12. Press the Display Mode soft key to select Ave.
The waveform data of record numbers specified in steps 9 and 10 are displayed
averaged.
To abort the average display, press the Display Mode soft key to select One.
Displaying a List of Time Stamps
13. Press the Show Map soft key. A list of acquired data numbers and the time at
acquisition end are displayed.
14. Turn the jog shuttle to select the history waveform you want to display and
press SELECT.
Clearing the History Memory
15. Press the History Clear soft key. All the waveforms in the acquisition memory
are cleared.
Note
Waveform acquisition cannot be started when the HISTORY menu is displayed.
11.1 Displaying History Waveforms
To Next Page
Loading...
